HVAC School - For Techs, By Techs - Podcasts
Podcast

HVAC School - For Techs, By Techs

Bryan Orr
0 Plays

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Latest Episodes

Why Every HVAC Company Needs a Home Performance Contractor - Short #312

17 Nov 2026
12:28

In this short podcast episode, Bryan explains why every HVAC company needs a home performance contractor (or at least access to the skills provided by home performance contractors). Many people try to solve comfort issues by upsizing the equipment or changing fan settings, but there could be several building- or duct-related issues at play. We start with complaints we can investigate, including discomfort in certain rooms or the presence of moisture or growth. Then, we can establish what the HVA…

Deliver High Performance Heat Pump Retrofits w/ David Richardson

12 Nov 2026
50:45

Heat pumps may be everywhere, but according to David Richardson, the industry is in danger of aiming at the wrong target. In this 2026 HVACR Training Symposium session, the Kentucky contractor's son, who has never lived in a home without a heat pump, opens with the story of Olympic rifle shooter Matthew Emmons. Emmons hit the bullseye with perfect precision in 2004, only to discover he had fired at the wrong lane's target. Richardson argues that contractors risk the same mistake when they treat …

Did You Actually Test Every Heat Strip - Short #311

10 Nov 2026
14:42

In this short podcast episode, Bryan talks about electric heat and whether your service or maintenance procedure actually allows you to test every heat strip. In our climate, we use electric heat as auxiliary heat (as opposed to a furnace in a dual-fuel setup). There is also some information about maintenance procedures, blower interlocks and relays, and math to determine amperage. If you put the thermostat in heat and the blower runs, you only prove that the heat pump is heating; it doesn't tel…

Uncovering the Root Causes of Commercial Refrigeration Failures

05 Nov 2026
1:01:28

In this live stream, co-branded with Kalos, Bryan Orr sits down with Kalos refrigeration team members Christian Maitland and Alex Orr to talk about the realities of working on market refrigeration systems. The conversation starts with the rapid arrival of new equipment in grocery stores, especially transcritical CO2 racks, and why even well-trained techs are running into problems nobody has seen before. Because these are engineered, built-up systems rather than mass-produced units, the first rea…

Why and How to Test Heat Pump Defrost - Short #310

03 Nov 2026
11:31

In this short podcast episode, Bryan covers why and how to test heat pump defrost during maintenance. Heat pumps need defrost because the outdoor coil absorbs heat in heating mode. Moisture collects and freezes on the coil during this process, and the rate at which it happens depends on the temperature and the amount of moisture in the outdoor air. Frost interferes with heat transfer and airflow and must be defrosted; the reversing valve shifts and auxiliary heat turns on. Before testing, identi…

Building a Business That Lasts: Why Culture Beats Strategy in HVACR w/ Tony Gonzalez

29 Oct 2026
1:05:28

In this live stream episode, Bryan sits down with Tony Gonzalez, who has spent more than 25 years at Fieldpiece and now leads the company's training department. Tony started out packing boxes in the warehouse straight out of high school, and the two longtime industry veterans use his experience to dig into why culture matters so much when you are building a business that lasts. As Bryan puts it, culture may be talked about in HVACR, but it is true everywhere. Tony walks through TURTL, the five c…

Tight Enough to Fail - Short #309

27 Oct 2026
11:24

In this short podcast episode, Bryan discusses electrical connections and whether tighter is better (or if a connection is tight enough to fail). Torque is a turning effect; force is applied at a distance from the screw's center, and that force creates pressure at the connection. A quarter-turn doesn't tell us how much force we have applied. You may notice a tight screw with other signs of a poor connection, like discoloration; tightening the connection may not help. At a connection, we want ver…

Glycol Skids for Market Refrigeration w/ Max Johnson

22 Oct 2026
1:02:18

Glycol secondary loop systems are showing up in more and more grocery stores, and in this episode of the HVAC School Podcast, Bryan Orr sits down with Max, one of the company's lead startup techs and its in-house subject matter expert on glycol skids. Max explains what these systems are, why clients are choosing them for retrofits, and what it takes to commission one without taking a live store down. The big picture: a traditional DX rack chills a water and propylene glycol mix in a heat exchang…

Your Thermostat Is Reading the Wall - Short #308

20 Oct 2026
15:31

In this short podcast episode, Bryan talks about why your thermostat is reading the wall, not the actual air temperature. A thermostat is an instrument designed to read temperature (and sometimes humidity); it displays those readings based on sensors and makes decisions. Most of these sensors are thermistors, which are resistors that change resistance with changes in temperature. Thermistors have low mass and respond to radiant, convective, and conductive heat. Air coming through the wall (conve…

Next-Gen Filtration - Pressure Drop, MERV 16, and Bypass Prevention w/ Chris Howells

15 Oct 2026
47:55

In this episode of the HVAC School Podcast, Bryan sits down with Chris Howells, senior training manager at AprilAire, to talk about what really makes a filtration system perform. Chris has nearly thirty years in the industry, including fifteen as a technician, and brings a field-first perspective on why filtration is more than just "a filter." Bryan also admits up front that his own contracting company is looking to put more high-efficiency filters into the field, so this conversation doubles as…

The Fuse Only Blows When You Leave - Short #307

13 Oct 2026
14:43

In this short podcast episode, Bryan talks about the fuse that only blows when you leave. The service call usually goes like this: you replace a blown fuse, the system runs fine, you leave, and then the fuse blows again. There could be several causes of a blown fuse. First, ask what was happening right before the system stopped, such as if the unit was starting up, if it was raining outside, or if the operating mode changed. The customer may not know the specifics, but they may be able to offer …

Questionable CO Alarms w/ Bill Spohn

08 Oct 2026
39:29

In this episode of the HVAC School Podcast, Bryan welcomes back Bill Spohn to talk about carbon monoxide and a troubling trend in the alarms being sold online. They start with the basics: the difference between a standard UL 2034 alarm and a true low-level CO monitor. UL 2034 alarms were designed to avoid nuisance calls, so they can stay silent through long exposures at relatively low concentrations. Low-level monitors are far more sensitive and can warn you that something is brewing before it b…

Same Charge, Different Numbers - Short #306

06 Oct 2026
14:02

In this short podcast episode, Bryan talks about what happens when you adjust the condenser airflow: you have the same charge, different numbers. This short covers HVAC condensers and flooded condensers in refrigeration applications. When you increase condenser airflow by repairing a condenser fan or washing the unit, the pressure and subcooling readings change even though the charge stays the same. Refrigerant enters the condenser as superheated vapor and goes through three stages: desuperheati…

Tech, Mechanic, or Craftsman? Finding Your Fit in HVAC

01 Oct 2026
49:57

Some people light up when they find a difficult electrical problem. Others want a wrench in their hand or take real satisfaction in a beautifully planned installation. Those differences can shape how we learn, what frustrates us, and where we find satisfaction in HVAC work. Bryan and Bert explore three overlapping tendencies in the trades: the technician, the mechanic, and the craftsman. In their framework, technicians gravitate toward diagnosing problems and understanding hidden causes. Mechani…

Normal Subcooling, Hidden Restriction - Short #305

29 Sep 2026
10:47

A liquid-line restriction should cause high subcooling, right? Not always. In this short episode of the HVAC School podcast, we look at why normal subcooling does not rule out a restriction and why one familiar diagnostic pattern cannot tell the whole story. Subcooling describes the refrigerant's temperature margin below saturation at a particular location. It does not directly measure how much refrigerant is stored in the condenser or prove that the metering device is receiving adequate liquid.…

Airflow Serenity w/ Alex Meaney

24 Sep 2026
50:41

In this episode from the 7th Annual HVACR Training Symposium, Alex Meaney delivers a live conference talk he calls "Airflow Serenity," built around the idea of knowing which duct problems are worth chasing and which changes will actually move the needle for a customer. He opens by describing and reframing how technicians identify airflow problems, including the "complementary failure" situation where both the ductwork and the equipment are improperly sized. The way we communicate with homeowners…

Less Compressor, More Suction Pressure - Short #304

22 Sep 2026
11:09

In this short podcast episode, Bryan talks about compression ratio and compressors, particularly why you see more suction pressure when the compressor unloads and what that means for the HVAC system's operation. When the compressor drops into low-stage or unloads, the suction pressure goes up. Regardless of the cause of reduced pumping, the head pressure will also drop as the suction pressure rises. If the conditions stay the same and the compressor stages down, the pumping capacity drops; the c…

Mastering Your Meter Advanced Functionality with Louise Kellar (UEi Test Instruments)

17 Sep 2026
1:06:45

In this episode, Bryan welcomes back Louise Kellar of UEi Test Instruments for a deep dive into getting more out of a digital clamp meter than the basic volts, amps, and ohms most techs rely on every day. The tool in the spotlight is UEi's High Accuracy Clamp Meter (HAC), which is accurate when dealing with the low current draws common on modern condenser fan and blower motors and is critical for reliable wattage and capacitor-under-load testing. The podcast also walks through a series of lesser…

Premature Coil Failure in Ductless Mini-Splits & VRF Equipment - Short #303

15 Sep 2026
22:13

In this short podcast, Bryan and Roman discuss premature coil failure in ductless mini-splits and VRF equipment. These coils are susceptible to a few different types of corrosion. Warmer coil saturation temperatures and shorter runtimes result in lower latent capacity; whatever moisture is on the coil dries on the coil instead of draining out. Minerals and chemicals (including chlorides from bleach or cleaners) interact with the coil and may cause corrosion, including formicary ("ant's nest") co…

Advanced Refrigerant Recovery: Best Practices for Diverse Systems and Environments

10 Sep 2026
1:12:35

In this live episode, Bryan sits down with Jim Bergmann of measureQuick and NAVAC trainers Zane and Jesse Stewart for a deep, technician-focused conversation about advanced refrigerant recovery. The group covers diverse system types and environments, including low-ambient recovery. Recovery machines cannot pump straight liquid, which we need to be mindful of during service. That said, vapor-only recovery works fine for small charges, but push-pull recovery becomes worthwhile once a system holds …

Podcasts

Comments & Reviews0